c c j j 1 1 p p r r o o g g r r a a m m m m a a b b l l e e c c o o n n t t r r o o l l l l e e r r s s smallest, most powerful solution for advanced production systems ? remote programming and monitoring of all the plcs connected the ethernet network via a computer running omrons cx-one software ? e-mail transmission ethernet module cj1w-etn21 is able to send user-created data, error log data and cpu status data as e-mail attachments using a smtp server. ? message routing service built into ethernet module cj1w-etn21 exchanges messages between connected plcs and host computers without direct program commands. ? ftp service (file transfer protocol) transfer and receive files between memory cards in the plc cpu and computer memory (cj1w-etn21 module). cj1 features ? add advanced capability with special i/o modules: position and motion control for 1, 2, 4, 16 or 30 axes; high speed counters; temperature control; analog i/o; and rfid control ? cj1 plcs communicate to nearly any third-party device via serial, modbus-ascii master, and modbus-rtu master/slave ? task oriented programming uses function-block, structured text and ladder logic languages ? one software package (cx-one) is all you need for programming, monitoring, motion controller setup, network configuration and more ? rohs compliant: contains no lead (pb) or hazardous materials ? safety ratings: ul, cul and ce; ul class i, division 2, groups a, b, c and d for use in hazardous locations; contact omron for rating details cx-programmer ethernet ethernet smtp server ethernet unit cs/cj-series cpu unit ethernet message message ethernet file data transfer best for industrial networking ethernet information network connects internet and front office/management information needs with factory floor operation. controller link network provides high-speed deterministic plc-to-plc message and data exchange. devicenet and profibus-dp networks these provide an open network that exchanges device data, messaging and status. serial communications omron serial modules support simple-to-use links with all serial devices to exchange data and make remote settings available to host computers, controller and other serial devices.
specifications ? i/o capacity: cj1m: 640 i/o and cj1g: 2560 i/o ? program capacity: cj1m: 5k to 20k steps cj1g/h: 10k to 120k steps ? processing speed: cj1m: 0.1 s (using load instruction) cj1g/h: up to 0.02 s ? communications: ethernet, controller link, devicenet, profibus-dp, serial, compobus/s ? real-time clock: yes ? supply voltage: 100 to 240 vac or 24 vdc ? dimensions: 90 h x 65 d mm; width depends on model; i/o units are 20 or 31 mm wide applications reflow oven uses the cj1g for temperature monitoring and control, and data logging small scale machines that do positioning use cj1m with pulse i/o and built-in inputs/outputs typical configuration basic configuration a cj1 series basic configuration consists of a cpu, power supply unit, and up to 10 basic i/o, special i/o and bus units, and an end cover. add up the current consumption for all the modules and the cpu, then select the power supply unit suitable for the application. cpu and expansion racks if the number of modules per rack exceeds 10 or the current consumption is greater than the capacity of the power supply units, use the cpu and expansion rack configuration. this divides the load from the modules across two power supply units. to allow communication and automatic channel assignment in programming, order an i/o control module for the cpu rack and an i/o interface module on each expansion rack. power supply unit memory card cpu unit i/o control unit up to 10 configuration units (basic i/o units, special i/o units, cpu bus units) end cover power supply unit i/o interface unit up to 10 configuration units (basic i/o units, special i/o units, cpu bus units) end cover i/o connecting cable
number of i/o program capacity data memory storage maximum i/o modules per cpu max. i/o expansion racks per cpu features current usage model 160 points 5k steps 32k words 10 0 -- 0.58 a, 5 v cj1m-cpu11 160 points 5k steps 32k words 10 0 built-in ethernet 0.58 a, 5 v cj1m-cpu11-etn 160 points 5k steps 32k words 10 0 10 i/o built in 0.65 a, 5 v cj1m-cpu21 320 points 10k steps 32k words 10 0 -- 0.58 a, 5 v cj1m-cpu12 320 points 10k steps 32k words 10 0 built-in ethernet 0.58 a, 5 v cj1m-cpu12-etn 320 points 10k steps 32k words 10 0 10 i/o built in 0.65 a, 5 v cj1m-cpu22 640 points 20k steps 32k words 20 1 -- 0.58 a, 5 v cj1m-cpu13 640 points 20k steps 32k words 20 1 built-in ethernet 0.58 a, 5 v cj1m-cpu13-etn 640 points 20k steps 32k words 20 1 10 i/o built in 0.65 a, 5 v cj1m-cpu23 960 points 10k steps 64k words 30 2 -- 0.91 a, 5 v cj1g-cpu42h 960 points 20k steps 64k words 30 2 -- 0.91 a, 5 v cj1g-cpu43h 1280 points 30k steps 64k words 40 3 -- 0.91 a, 5 v cj1g-cpu44h 1280 points 60k steps 128k words 40 3 -- 0.91 a, 5 v cj1g-cpu45h 2560 points 60k steps 128k words 40 3 -- 0.99 a, 5 v cj1h-cpu65h 2560 points 120k steps 256k words 40 3 -- 0.99 a, 5 v cj1h-cpu66h 2560 points 250k steps 448k words 40 3 -- 0.99 a, 5 v cj1h-cpu67h cpus item description current consumption model i/o control module mount next to cpu for expansion rack connection 0.02 a, 5 v cj1w-ic101 i/o interface module mount next to expansion rack power supply for cpu interface 0.13 a, 5 v cj1w-ii101 expansion rack units description function length model expansion rack connecting cables connects expansion racks to the cpu rack or another expansion rack 0.3 m cs1w-cn313 0.7 m cs1w-cn713 2 m cs1w-cn223 3 m cs1w-cn323 5 m cs1w-cn523 10 m cs1w-cn133 12 m cs1w-cn133-b2 expansion rack connecting cables input voltage output rating output capacity current usage model 100 to 240 vac 5 a, 5 vdc with 2 a run output 25 w max. 0.8 a, 24 vdc cj1w-pa205r 100 to 240 vac 2.8 a, 5 vdc 14 w max. 0.4 a, 24 vdc cj1w-pa202 24 vdc 5 a, 5 vdc 25 w max. 0.8 a, 24 vdc cj1w-pd025 24 vdc 2 a, 5 vdc 10 w max. 0.4 a, 24 vdc cj1w-pd022 power supply item description model flash memory cards 64 mb hmc-ef672 memory card adapter mounts a memory card to fit the pcmcia card slot on a computer hmc-ap001 flash memory cards
type points rating connection current usage model dc input 16 inputs 7 ma, 24 vdc terminal block 0.08 a, 5 vdc cj1w-id211 32 inputs 4.1 ma, 24 vdc fujitsu connector 0.09 a, 5 vdc cj1w-id231 32 inputs 4.1 ma, 24 vdc mil-type connector 0.09 a, 5 vdc cj1w-id232 64 inputs 4.1 ma, 24 vdc fujitsu connector 0.09 a, 5 vdc cj1w-id261 64 inputs 4.1 ma, 24 vdc mil-type connector 0.09 a, 5 vdc cj1w-id262 ac input 16 inputs 7 ma, 100-120 vac terminal block 0.09 a, 5 vdc cj1w-ia111 interrupt input 16 inputs 7 ma, 24 vdc terminal block 0.08 a, 5 vdc cj1w-int01 relay bit output 8 outputs 2 a, 250 vac/24 vdc, independent contacts terminal block 0.048 a, 24 vdc cj1w-oc201 16 outputs 2 a, 250 vac/24 vdc, independent contacts terminal block 0.096 a, 24 vdc cj1w-oc211 transistor output 16 outputs 0.5 a, 12 to 24 vdc, npn (sinking) terminal block 0.10 a, 5 vdc cj1w-od211 16 outputs 0.5 a, 24 vdc, pnp (sourcing) load short-circuit protection, disconnection detection, alarm terminal block 0.10 a, 5 vdc cj1w-od212 32 outputs 0.5 a, 12 to 24 vdc, npn (sinking) fujitsu connector 0.14 a, 5 vdc cj1w-od231 64 outputs 0.3 a, 12 to 24 vdc, npn (sinking) fujitsu connector 0.17 a, 5 vdc cj1w-od261 item models dimensions h x w x d mm 8-/16-point i/o modules cj1w-id201/211, cj1w-ia11/-201 90 x 31 x 89 cj1w-od201/202/203/204 90 x 31 x 89 cj1w-od211/212 90 x 31 x 89 cj1w-oc201/211 90 x 31 x 89 cj1w-oa201 90 x 31 x 89 32-point i/o modules cj1w-id231/232 90 x 20 x 69.3 (140 w/connector) cj1w-od231/232 90 x 20 x 69.3 (140 w/connector) 64-point i/o modules cj1w-id261/id262 90 x 31 x 66.5 (112.5 w/connector) cj1w-od261/262/263 90 x 31 x 66.5 (112.5 w/connector) interrupt input module cj1w-int01 90 x 31 x 69.3 (140 w/connector) digital input and output modules dimensions type axes i/o type rating connection current usage model position control module 1 axis open collector, 24 v 500 kpps pulse outputs, inputs for origin, limit switches, stop interrupt connector 0.25 a, 5 vdc cj1w-nc113 1 axis line driver connector 0.25 a, 5 vdc cj1w-nc133 2 axes open collector, 24 v connector 0.25 a, 5 vdc cj1w-nc213 2 axes line driver connector 0.25 a, 5 vdc cj1w-nc233 4 axes open collector, 24 v connector 0.36 a, 5 vdc cj1w-nc413 4 axes line driver connector 0.36 a, 5 vdc cj1w-nc433 16 axes mechatrolink-ii provides instant communications between the position controller and omrons w-series servo drives use cx-motion-ncf software response: 0.25 to 8 ms for 16 axes functions: position, speed and torque control; accesses all drive parameters ml-ii connector 0.36 a, 5 vdc CJ1W-NCF71 special i/o and control modules
type channels i/o type rating connection current usage model motion control module 30 axes mechatrolink-ii provides instant communications between the motion controller and omrons w-series servo drives use cx-motion software functions: electronic cam profiles and axis synchronization; registration inputs; accesses all drive parameters ml-ii connector 0.6 a, 5 vdc cj1w-mch71 high- speed counter module 2 inputs line driver, 24 v input frequency: 500 khz max. functions: simple counter; linear or ring counter 2 configurable digital inputs + outputs connector 0.28 a, 5 vdc cj1w-ct021 2 ssi inputs (absolute position data) synchronous serial protocol functions: baud rate, encoding type, data length, etc. can be set per channel terminal 0.30 a, 5 vdc cj1w-cts21-e 4 inputs line driver, 24 v input frequency: 100 khz max. function: target values trigger interrupt to cpu 4 configurable digital inputs + outputs connector 0.32 a, 5 vdc cj1w-ctl41-e analog i/o 4 input ranges: 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v, 4 to 20 ma resolution: 1/8,000 accuracy: v: 0.2% of pv; i: 0.4% of pv conversion time: 250 s/ point features: offset/gain adjustment, peak hold, moving average, alarms terminal block 0.42 a, 5 vdc cj1w-ad041-v1 8 input ranges: 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v, 4 to 20 ma resolution: 1/8,000 accuracy: v: 0.2% of pv; i: 0.4% of pv conversion time: 250 s/ point features: offset/gain adjustment, peak hold, moving average, alarms terminal block 0.42 a, 5 vdc cj1w-ad081-v1 2 analog output 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v, 4 to 20 ma resolution: 1/4,000 accuracy: v: 0.3% of pv i: 0.5% of pv conversion time: 1 ms/point features: offset/gain adjustment, output hold terminal block 0.12 a, 5 vdc cj1w-da021 4 analog output 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v, 4 to 20 ma resolution: 1/4,000 accuracy: v: 0.3% of pv i: 0.5% of pv conversion time: 1 ms/point features: offset/gain adjustment, output hold terminal block 0.12 a, 5 vdc cj1w-da041 8 voltage output 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v resolution: 1/8,000 accuracy: 0.3% of pv conversion time: 250 s/point features: offset/gain adjustment, output hold terminal block 0.14 a, 5 vdc cj1w-da08v 8 current output 4 to 20 ma resolution: 1/8,000 accuracy: 0.5% of pv conversion time: 250 s/point features: offset/gain adjustment, output hold terminal block 0.14 a, 5 vdc cj1w-da08c 4 + 2 input + output ranges: 0 to 5 v, 0 to 10 v, -10 to 10 v, 1 to 5 v, 4 to 20 ma resolution: 1/8,000 accuracy: input: 0.2% of pv output: 0.3% of pv conversion time: 1 ms/ point features: offset/gain adjustment, scaling, peak hold, moving average, alarms, output hold terminal block 0.58 a, 5 vdc cj1w-mad042 special i/o and control modules (continued)
type channels i/o type rating connection current usage model process input 2 1 to 5v, 0 to 5v, +/-5v, 0 to 10v, +/-10v, 0 to 1.25v, +/-1.25v, 4 to 20 ma, 0 to 20 ma resolution: 1/64,000 accuracy: 0.05% of pv conversion time: 5 ms/ point features: isolated inputs, configurable alarms, maintenance functions, user- defined scaling terminal block 0.18 a, 5 vdc (use an external 90 ma, 5 vdc power supply) cj1w-pdc15 temperature input modules 2 isolated thermocouple input: types b, e, j, k, l, n, r, s, t, u, wre-5-26, pl2; -100 to 100 mv resolution: 1/64,000 accuracy: 0.05% of pv conversion time: 5 ms/point terminal block 0.18 a, 5 vdc (use an external 60 ma, 24 vdc power supply) cj1w-pts15 2 isolated rtd input: pt100, jpt100, pt50, or ni508.4 resolution: 1/64,000 accuracy: 0.05% of pv conversion time: 5 ms/point terminal block 0.18 a, 5 vdc (use an external 60 ma, 24 vdc power supply) cj1w-pts16 4 isolated thermocouple input: types k, j, l, r, s, t, b resolution: -- accuracy: 0.3% of pv conversion time: 62.5 ms/point terminal block 0.25 a, 5 vdc cj1w-pts51 4 isolated rtd input: pt100, jpt100 resolution: -- accuracy: 0.3% of pv conversion time: 62.5 ms/point terminal block 0.25 a, 5 vdc cj1w-pts52 temperature controller modules, thermo- couple input 4 loops npn output 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc001 4 loops pnp output 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc002 2 loops npn output, heater burnout detection 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc003 2 loops pnp output, heater burnout detection 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc004 temperature controller modules, platinum rtd input 4 loops npn output 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc101 4 loops pnp output 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc102 2 loops npn output, heater burnout detection 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc103 2 loops pnp output, heater burnout detection 0.1c resolution; 0.3% of pv accuracy terminal block 0.25 a, 5 vdc cj1w-tc104 special i/o and control modules (continued) item models dimensions h x w x d mm special i/o modules all versions 90 x 31 x 65 motion controller cj1w-mch71 90 x 80 x 65 dimensions
industrial networking and communications modules transparent message routing: program-free access to field devices and easy, fast data exchange over ethernet. network type description rating current usage model ethernet, 100 base tx/ 10 base t udp, tcp/ip, ftp server, socket services, dns client, smtp (email services), sntp (time adjust services), fins routing 100 mbps max. speed; 2.5 km distance; 254 nodes; twisted pair cable 0.38 a, 5 vdc cj1w-etn21 controller link data links and message communications between plcs and computers; omron proprietary protocol 2 mbps max. speed; 1.5 km distance; 62 nodes (using 2 repeater units); shielded twisted pair cable 0.35 a, 5 vdc cj1w-clk21-v1 pci board with support software shielded twisted pair cable -- 3g8f7-clk21-ev1 devicenet master unit provides remote i/o and message communications; functions as master and/or slave 500 kbps; 500 m distance; 63 nodes; devicenet cable; can control up to 32,000 points max. per master 0.33 a, 5 vdc cj1w-drm21 profibus-dp master unit provides data exchange, diagnostics and message communi- cations 12 mbps; 1200 m distance; 125 nodes; shielded twisted pair cable; allows 7,168 words of i/o data per pll; one rs-485 port 0.40 a, 5 vdc cj1w-prm21 slave unit max. 180 words of input and output; one rs-485 port 0.40 a, 5 vdc cj1w-prt21 compobus/s distributed i/o master unit remote i/o data exchange with 256 points 750 kbps; 500 m distance; 32 nodes; 2- or 4- conductor vctf cable 0.15 a, 5 vdc cj1w-srm21 serial exchanges data using protocol macro for automatic handshaking with omron serial devices (compoway/f); host link to computers; and 1:n nt link for omron hmis; modbus and user-defined protocols two rs-232c ports 0.28 a, 5 vdc cj1w-scu21-v1 two rs-422/rs-485 ports 0.38 a, 5 vdc cj1w-scu31-v1 one rs-232c port and one rs-422/ rs-485 port 0.38 a, 5 vdc cj1w-scu41-v1 rs-232c to rs-422a conversion module 1 rs-232c port and 1 rs-422a terminal block 0.15 a, 5 vdc nt-al001-e rs-232c to rs422/rs-485 adapter used for serial plc link with cj1m. converts an rs-232c port to an rs- 422/rs-485 port. mounts directly to the cpu. -- cj1w-cif11 internet host computer with ethernet running production and supply chain management applications ethernet devicenet serial, using protocol macro ns or nsj hmi with built-in ethernet and optical live video display capabilities cj1m programmable controller with built-in ethernet capability all modules measure 90 h x 31 w x 89 d mm. cj1 or cs1 programmable controller with ethernet unit
? 2006 omron electronics llc printed in the u.s.a. 5/06 1k p02i-e-02 cx-one is the single programming and config- uration software used to build and program networks, plcs, hmis, motion control systems, drives, temperature controllers and sensors. it provides seamless communi- cations between system components because they all speak a common language. the benefit of using a single software is reduced complexity of configuration so it can be completed with minimal training. with cx-one software and one connection to your machine, you can fully access all settings, programs and configurations. upload and download all programs, comments, settings, fieldbus configurations, hmi and intelligent device configurations. you can gain remote access to service your complete machine, and reset and restart operations from an hmi. accomplish more every minute with omrons drag-and-drop functionality. it simplifies control system configuration and hmi visuali- zation so projects are completed in minutes instead of days. our pre-built object libraries only require you to add parameters to automatically establish communications with omron devices. one software one connection one minute programming and diagnostic software software name description quantity model cx-one programming and configuration management software that lets you build, configure and program networks, plcs, hmis, motion control systems, temperature controllers and sensors 1 license cxone-al01c-e 3 licenses cxone-al03c-e 10 licenses cxone-al10c-e name specifications cable length model peripheral device connecting cables (for peripheral port) connects computers, d-sub 9-pin 0.1 m cs1w-cn118 2.0 m cs1w-cn226 6.0 m cs1w-cn626 peripheral device connecting cable (for rs-232c port) connects computers, d-sub 9-pin 2.0 m c200h-cn229-eu usb-serial conversion cable use with one of the cables above 0.5 m cs1w-cif31 programming cables note: specifications are subject to change. mexico sales offices argentina sales office mexico, d.f. 555.660.3144 monterrey, n.l. 818.377.4281 cono sur 54.114.787.1129 ciudad jurez 656.623.7083 quertaro 442.135.4510 brazil sales office other latin american sales sao paulo 55.11.2101.6310 www.omron.com.br florida, eu 1.954.227.2121 www.espanol.omron.com chile sales office santiago 562.206.4592 omron electronics llc 877.486.6766 www.omron247.com omron canada 416.286.6465 www.omron.ca
|
